Mold Testing – Pure Maintenance Mold Removal

/ Mold, Fungus, Bacteria, and Virus Removal & Sterilization.

Head Office in Portland Oregon

4949 S. Macadam Ave. #101 Portland, Oregon 97239

Request a Quote

Looking for a quality and affordable builder for your next project?

Call Us Today!

(503) 782-5200

Working Hours

We are happy to meet you during our working hours. Please make an appointment.

Head Office in Portland Oregon

4949 S. Macadam Ave. #101 Portland, Oregon 97239

Request a Quote

Looking for a quality and affordable builder for your next project?

Call Us Today!

(503) 782-5200

Working Hours

We are happy to meet you during our working hours. Please make an appointment.

Pure Maintenance Portland Mold Testing

Mold Testing and Allergies
We do a thorough investigation and inspection revealing moisture traps.
Mold Removal and Fogging
Rescom Restoration provides mold removal from homes and businesses.
Water Damage Repair
We can return any home to the state it was in before the damage occurred.

Portland Oregon Residence and Commercial Mold Testing

We address all mold the same when it pertains to remediation however harmful molds nevertheless require extra medical assistance from Dr’s to help your body detoxify. We provide both Air testing and ERMI testing to offer you a full spectrum of what is going on in your environment.

We send out all of our testing samples to a nationally known mold testing Laboratory.. It is important to have an independent 3rd party lab carry out all of our Portland mold testing. This way you can be sure the results you get are impartial and won’t lead to unnecessary mold treatment and expense.

1 Free Air Test with Service Call ($50 Value)

(mention this promo during scheduling to redeem)

What To Anticipate During the Course Of Testing

When you schedule a service call, we enter into your attic and crawl space locations to look for any visual evidence of mold or water damage in addition to common problems which trigger dampness exposure allowing mold growth.

Our air testing service call consists of 4 separate area mold air tests that we send to a 3rd party lab for analysis. Within 3-4 days we’ll get a comprehensive report on the mold levels and particular kinds of mold in the ambient air in your house. This service call is $350 for the very first 4 tests plus ($50) each extra test you want depending upon the size of your house and how extensive you wish to be. The average recommended tests per house is between 5 and eight to start.

The ERMI which is the DNA and Mycotoxin testing is $500 per test and takes up to 2 weeks for final results.(Rushed results are available for additional fees)

This will notify us if there are extremely allergenic or hazardous molds in raised levels so we can develop what level of seriousness we might be taking a look at to help in the remediation decision-making process.

Each house is unique and we can help you choose how many tests you wish to actually have done based upon the specifics of your house and circumstance. Give us a call right away to schedule an appointment!

STEP 1: We Take Mold Samples

We arrive for your free inspection to look at and evaluate any visual mold concerns. If mold is very visible and obviously in high amounts we usually don't recommend spending a bunch of money on testing.
Air sample testing will detect what mold spores are present in the air in various areas of your home including outside. We test outside to give a baseline to compare the mold samples to the indoor air.
We also offer EMMA tests. They evaluate and break the mold down to the exact DNA as well as look for 15 different mycotoxins.
Both of these tests will confirm the presence of mold in your home or office and give us the information we need to develop the right treatment plan for you.

Step 2: We Analyze The Samples

We send these samples to a third-party laboratory for examination under a microscope or have an Environmental Mold and Mycotoxin Assessment performed.
The laboratory we use is completely unbiased and will give us a full report of what type of molds were detected. Depending on which test, the results will take anywhere from 3 days to 2 weeks.

Mold Types: Allergenic, Pathogenic and Toxigenic

Allergenic

Molds that trigger and produce allergic reactions and allergic reactions including asthma attacks

Pathogenic

Molds that trigger illness in those experiencing an intense health problem.

Toxigenic

Molds that produce hazardous substances that can lead to unsafe or perhaps deadly health conditions. This is often referred to as " hazardous mold."

STEP 3: Results and Action Plan

Once we have your lab report back, we’ll contact you and go over the results. If they are considered high or unhealthy levels, we will recommend treatment.
Treatment will include going over the history of your home and have a deeper investigation on where the high level of mold is coming from.
If we can't find a moisture source, we’ll advise you what steps to take to limit humidity and maintain a dryer climate indoors to help prevent mold from growing.
The last thing we do after evaluation of your entire home, eliminating moisture contributors, removing saturated building materials and drying things out is fogging everything with our two part treatment.

Our Dry Fog System

Dry Fog

Small droplets rebound from surfaces creating a vapor or fog. The fog and gas that is created during this process, actually expands pushing this gas into every nook and cranny, behind and under furniture, permeating porous items like carpet and fabric furniture. creating an unavoidable lethal environment for mold and bacteria.

Wet Fog or Ozone

The larger droplets burst and develop wet surface areas, like rain. The larger particle size also develop gaps in molecular coverage and leaves a residue.

Dry-fogging permits us to sanitize every part of a house and everything in it. Our solution eats away the external membrane of mold spores from every corner of your house. Our dry fog decontaminates carpets, furniture, upholstery, cabinets, toys, electronic devices and more. Anywhere mold spores can travel and settle our fog will reach and wipe out.

Our dry fog also deals with the whole hvac furnace and system by sending it through the duct during treatment. It successfully decontaminates walls, floors, and ceilings, practically every surface of your house. If you have any location that has a history of floods however is currently dry and the problem has actually been repaired such as bellow a window or possibly a shower that dripped at one time, we can in fact pump our fog into wall bays to reach locations instead of getting rid of sheetrock or building materials.

We break down mold– not walls!

Kill mold and keep your walls in one piece with dry-fogging

The main problem? Traditional mold remediation hasn’t changed much in 30 years. It requires containment, elimination and treatment of the primary location affected. Sadly, a lot of contractors and yes even “specialists” do not follow through with good work standards. These old standards do not require nor can most people pay to have their whole house hand wiped down and every item cleaned up of mold spores so they just concentrate on the contained location where the main incident occurred. We understand that if you have an active mold issue developing in your house for any amount of time, you wind up getting mold spores throughout your house. This is the real problem. Individuals in general associate with mold on a visual level. The problem lies in the complexity of mold. Mold spores for example are microscopic! They are similar in size to bacteria. Now in their spore state, there can be thousands if not millions of mold spores that may lay inactive for many years just bouncing along in the dust in your house behind and under furniture, in your A/C, and especially in your carpet! All invisible to the naked eye.

In most cases, there will be no requirement for any demolition within the structure. Our process leaves you with mold-free air, eliminates mold spores on contact and puts an end to the spread of mold in your house or office.

Some Additional Benefits Are:

100% non-toxic procedure
Single-day job for most applications
Environmentally Safe
Demolition-free in most cases
Always effective
EPA Registered
Affordable
Guaranteed to kill mold

House Air Quality Screening

You may not recognize it however your body may reveal signs of mold in the air. Mold spores are microscopic, similar to the size of bacteria. However just because you do not see mold, it does not suggest it isn’t there and can be in high amounts and still be visually undetected. | Just due to the fact that you do not see mold, it does not suggest it isn’t there and can be in high amounts and still be visually undetected. If you are dealing with any unexplainable allergic reaction signs, breathing issues, even skin rashes. Having unexplainable health concerns may be a indication you ought to begin down the road to see if mold exposure could be the problem.

Every mold treatment ought to begin with a extensive visual assessment. If no noticeable signs are discovered then getting your air quality tested is your next step. Air quality readings provide insight into the seriousness of your mold problem. The goal with every one of our treatments is to guarantee air quality that is entirely without unsafe mold spores. After we‘ve treated the whole house, we can carry out a follow-up air quality test upon demand. We wish to leave every task understanding that your house and everyone in it is more comfortable understanding we‘ve entirely decontaminated everything and it is not continuing to pose a health hazard.

Contact Pure Maintenance of Portland, Oregon for a full air quality check.

Service warranties.

Pure Maintenance gives the best mold removal guarantees in all of the Portland Area– any treatment carried out through Pure Maintenance will consist of a 100% free re treatment 90 Day service warranty along with a comprehensive lifetime warranty that stays with the home. If any harmful molds become present in the location we treated or the overall mold levels are not at healthy levels as compared to the outside within the very first 90 days, Pure Maintenance will come back and re-treat the location for free. After the very first 90 days are up, you continue to get a considerable discount on any future mold treatments no matter what the cause. Even if you have an totally new dampness issue, up to one year after your initial 90 days are up, you get a 60% discount for any retreatments for the next 12 months, then 50% at 2 years, 40% and so on each year after until you reach 20% discount forever. This warranty sticks with the house and is transferable to any new buyers. Please give us a call for specifics and extra information about our guarantees.

Get rid of mold at last!

If you‘ve taken care of the moisture problem that’s led to the mold development in your house or office, our dry fog mold removal is the ideal option to remediate all the remaining spores from your house. In addition to sterilizing everything, we also encapsulate everything with our long-term preventative. With the source of the dampness stopped, the materials dry, our system swiftly goes in and sanitizes all mold spores from the air and surface areas.

After we’re done, we can make certain the mold levels of your house or business are back to healthy levels with no harmful molds so there’s no chance at a return. (Additional testing costs may apply) If you’re aiming to put your mold problem to an end, call Pure Maintenance right now.

Don't hesitate and lets get started! Contact us for a free inspection on your next home or business mold removal and remediation project.

Request an Estimate

Call Today At: (503) 461-1006