Mold Testing

/ Mold, Fungus, Bacteria, and Virus Removal & Sterilization.

Head Office in Portland Oregon

555 SE Martin Luther King Jr Blvd Unit 105, Portland, OR 97214

Request a Quote

Looking for a quality and affordable builder for your next project?

Call Us Today!

(503) 782-5200

Working Hours

We are happy to meet you during our working hours. Please make an appointment.

Head Office in Portland Oregon

555 SE Martin Luther King Jr Blvd Unit 105, Portland, OR 97214

Request a Quote

Looking for a quality and affordable builder for your next project?

Call Us Today!

(503) 782-5200

Working Hours

We are happy to meet you during our working hours. Please make an appointment.

Pure Maintenance Portland Mold Testing

Mold Testing and Allergies
We do a thorough investigation and inspection revealing moisture traps.
Mold Removal and Fogging
Rescom Restoration provides mold removal from homes and businesses.
Water Damage Repair
We can return any home to the state it was in before the damage occurred.

Portland Oregon Residential and Commercial Mold Diagnostic Tests

We handle all mold the exact same when it comes to removal but toxic molds nevertheless need extra medical help from Dr’s to help your body detox. We provide both Air screening and ERMI screening to give you a full spectrum of what is going on in your environment.

We send out all of our screening samples to a nationally known mold screening Laboratory.. It is necessary to have an independent 3rd party lab carry out all of our Portland mold screening. In this manner you can be sure the results you get are objective and won’t cause unneeded mold treatment and expense.

1 Free Air Test with Service Call ($50 Value)

(mention this promo during scheduling to redeem)

What To Expect At The Time Of Testing

When you set up a service call, we look into your attic and crawl space areas to try to find any visual signs of mold or water damage along with typical issues which trigger moisture direct exposure inviting mold growth.

Our air screening service call includes 4 different area mold air tests that we send off to a 3rd party lab for evaluation. Within 3-4 days we’ll get a comprehensive report on the mold levels and specific kinds of mold in the ambient air in your home. This service call is $350 for the very first 4 tests plus ($50) each extra test you desire depending upon the size of your house and how thorough you wish to be. The average recommended tests per house is between five and eight to start.

The ERMI which is the DNA and Mycotoxin screening is $500 per test and takes up to two weeks for final results.(Rushed results are available for additional costs)

This will alert us if there are highly allergenic or hazardous molds in raised levels so we can establish what level of urgency we might be looking at to help in the removal decision-making process.

Each house is unique and we can help you choose the number of tests you wish to have done based upon the specifics of your house and situation. Give us a call right away to set up a consultation!

STEP 1: We Take Mold Samples

We arrive for your free inspection to look at and evaluate any visual mold concerns. If mold is very visible and obviously in high amounts we usually don't recommend spending a bunch of money on testing.
Air sample testing will detect what mold spores are present in the air in various areas of your home including outside. We test outside to give a baseline to compare the mold samples to the indoor air.
We also offer EMMA tests. They evaluate and break the mold down to the exact DNA as well as look for 15 different mycotoxins.
Both of these tests will confirm the presence of mold in your home or office and give us the information we need to develop the right treatment plan for you.

Step 2: We Analyze The Samples

We send these samples to a third-party laboratory for examination under a microscope or have an Environmental Mold and Mycotoxin Assessment performed.
The laboratory we use is completely unbiased and will give us a full report of what type of molds were detected. Depending on which test, the results will take anywhere from 3 days to 2 weeks.

Mold Types: Allergenic, Pathogenic and Toxigenic

Allergenic

Molds that trigger and produce allergies and allergies such as asthma attacks

Pathogenic

Molds that trigger health problems in those suffering from an severe health problem.

Toxigenic

Molds that produce hazardous substances that can cause dangerous or even fatal health conditions. This is often referred to as " hazardous mold."

STEP 3: Results and Action Plan

Once we have your lab report back, we’ll contact you and go over the results. If they are considered high or unhealthy levels, we will recommend treatment.
Treatment will include going over the history of your home and have a deeper investigation on where the high level of mold is coming from.
If we can't find a moisture source, we’ll advise you what steps to take to limit humidity and maintain a dryer climate indoors to help prevent mold from growing.
The last thing we do after evaluation of your entire home, eliminating moisture contributors, removing saturated building materials and drying things out is fogging everything with our two part treatment.

Our Dry Fog System

Dry Fog

Small droplets bounce off from surfaces creating a vapor or fog. The vapor and gas that is created during this process, actually expands pushing this gas into every nook and cranny, behind and under furniture, permeating porous items like carpet and fabric furniture. creating an unavoidable deadly environment for mold and bacteria.

Wet Fog or Ozone

The bigger droplets burst and produce damp surface areas, like rain. The bigger particle size likewise produce gaps in molecular coverage and leaves a residue.

Dry-fogging permits us to disinfect every part of a house and everything in it. Our treatment method eats away the outer membrane of mold spores from every corner of your building. Our dry fog decontaminates carpet and rugs, furniture, upholstery, cabinets, toys, electronics and more. Everywhere mold spores can travel and reside our fog will reach and wipe out.

Our dry fog likewise treats the whole heating and cooling furnace and system by sending it through the duct during treatment. It effectively decontaminates walls, floors, and ceilings, essentially every surface area of your house. If you have any location that has a history of water leaking but is presently dry and the problem has been fixed such as bellow a window or possibly a shower that leaked at one time, we can actually pump our fog into wall bays to reach areas instead of getting rid of sheetrock or property materials.

We break down mold– not walls!

Wipe out mold and keep your walls in one piece with dry-fogging

The primary problem? Standard mold removal hasn’t changed much in thirty years. It calls for containment, removal and treatment of the primary location impacted. Unfortunately, a lot of contractors and yes even “professionals” do not follow through with good work standards. These old standards do not call for nor could most people afford to have their whole house hand wiped down and every item cleaned up of mold spores so they just focus on the contained location where the main incident occurred. We know that if you have an active mold issue flourishing in your home for any amount of time, you wind up getting mold spores throughout your house. This is the real problem. Individuals in general associate with mold on a visual level. The problem boils down to the complexity of mold. Mold spores for instance are microscopic! They are comparable in size to bacteria. Now in their spore state, there can be thousands if not millions of mold spores that may lay dormant for years just bouncing along in the dust in your home behind and under furniture, in your A/C, and particularly in your carpet! All unseen to the naked eye.

In a lot of cases, there will be no requirement for any demolition within the building. Our process leaves you with mold-free air, removes mold spores on contact and puts an end to the spread of mold in your home or workplace.

Some Additional Benefits Are:

100% non-toxic procedure
Single-day job for most applications
Environmentally Safe
Demolition-free in most cases
Always effective
EPA Registered
Affordable
Guaranteed to kill mold

House Air Quality Testing

You may not see it but your body may reveal indications of mold in the air. Mold spores are microscopic, comparable to the size of bacteria. However just because you do not see mold, it does not suggest it isn’t there and can be in high amounts and still be visually undetected. | Just due to the fact that you do not see mold, it does not suggest it isn’t there and can be in high amounts and still be visually undetected. If you are dealing with any indescribable allergy symptoms, breathing issues, even skin rashes. Having indescribable health issues may be a sign you ought to start down the road to see if mold direct exposure could be the problem.

Every mold treatment should start with a thorough visual examination. If no visible indications are spotted then getting your air quality checked is your next step. Air quality readings supply insight into the severity of your mold problem. The goal with every one of our treatments is to ensure air quality that is totally devoid of dangerous mold spores. After we‘ve dealt with the whole house, we can carry out a follow-up air quality test upon demand. We wish to leave every job knowing that your house and everyone in it is more comfortable knowing we‘ve totally decontaminated whatever and it is not continuing to pose a health threat.

Contact Pure Maintenance of Portland, Oregon for a full air quality check.

Guarantees.

Pure Maintenance provides the best mold remediation warranties in all of the Portland Community– any treatment carried out through Pure Maintenance will include a 100% free re treatment 90 Day guarantee along with a comprehensive lifetime warranty that stays with the home. If any toxic molds end up being present in the location we dealt with or the overall mold levels are not at healthy levels as compared to the outdoors within the very first 90 days, Pure Maintenance will return and re-treat the location free of charge. After the very first 90 days are up, you continue to get a considerable discount on any future mold treatments no matter what the cause. Even if you have an entirely brand-new moisture issue, as much as one year after your initial 90 days are up, you get a 60% discount for any retreatments for the next 12 months, then 50% at 2 years, 40% and so on each year after until you reach 20% discount forever. This warranty sticks with the house and is transferable to any new buyers. Please give us a call for specifics and extra info about our warranties.

Destroy mold once and for all!

If you‘ve looked after the wetness problem that’s led to the mold growth in your home or workplace, our dry fog mold remediation is the ideal alternative to remediate all the remaining spores from your house. Along with sterilizing everything, we also encapsulate everything with our long term preventative. With the origin of the moisture stopped, the materials dry, our system swiftly goes in and decontaminates all mold spores from the air and surface areas.

After we’re done, we can ensure the mold levels of your house or business are back to healthy levels with no toxic molds so there’s no chance at a return. (Additional testing costs may apply) If you’re looking to put your mold problem to an end, call Pure Maintenance today.

Don't hesitate and lets get started! Contact us for a free inspection on your next home or business mold removal and remediation project.

Request an Estimate

Call Today At: (503) 461-1006

What Our Clients Say!

Leading The Way In Mold Removal & Remediation!

“Pure Maintenance Portland was more than mold removal, they understood the need for improving the attic ventilation and provided services above and beyond mold treatment. Jason explained the life cycle of mold and mold spores and his fog treatment is the best!” – Marty F, Vancouver